Barnes Magnetic Coolant Separators (MCS) is considered the standard for ferrous metal grinding operations worldwide. With over 11,000 of these filters in use today, many companies are realizing the resulting benefits of increased machine uptime, improved wheel life, reduced coolant costs, and better surface finishes on parts. The unique ferrite magnet design of these filters delivers up to 2½ times the magnetic surface of competitive units and the rare earth magnet filtration system units provide up to 5 times the magnetic pull of competitive units.
Features
- Lowest Cost Cleaning
- Bulk Removal of Ferrous Material
- Primarily Water – Light Oil
- Rough Grinding – Chip Making
Applications
- Ferrous Material Only
- Bulk Cleaning
- Ferrite magnets for nominal micron levels of 25-35 microns
- For a small premium, rare earth “super” magnetic versions capable of removing 98% of particles to a 10 micron level.
Magnetic Coolant Separator | |||
Flow Rate Capacity (Gallons Per Minute) | |||
Model | Water Soluble | Oil | |
Steel | Cast Iron | 50 SSU | |
MCS-610 | 20 | 10 | 10 |
MCS-620 | 40 | 20 | 20 |
MCS-1515 | 70 | 35 | 35 |
MCS-1530 | 125 | 60 | 60 |
MCS-1560 | 250 | 125 | 125 |
* Note: Flow rate for oil is dependent on oil viscosity |
Model |
610
|
620
|
1515
|
1530
|
1560
|
Flow Rate (Viscosity 30 SSU at 100 degrees) |
20 GPM
|
40 GPM
|
65 GPM | 125 GPM | 250 GPM |
Drum Diameter |
6”
|
6”
|
15”
|
15”
|
15”
|
Drum Length |
10”
|
20”
|
15”
|
30”
|
60”
|
Motor |
1/50 H.P.
|
1/50 H.P.
|
¼ H.P.
|
¼ H.P.
|
½ H.P.
|
Minimum Inlet Height (Dim. C) |
5.12”
|
5.34”
|
11.44”
|
11.44”
|
11.44”
|
Overall Length (Dim. A) (without sludge hopper) Note: Dim. Is approximate |
18.70”
|
24.82”
|
37.5”
|
42.5”
|
47.5”
|
Overall Width (Dim. B) |
24.43”
|
34.43”
|
15.75”
|
30.75”
|
60.75”
|
Weight |
200 lbs.
|
250 lbs.
|
750 lbs.
|
1000 lbs.
|
1750 lbs.
|
Drum Shell – Stainless Steel |
16 GA.
|
16 GA.
|
16 GA.
|
16 GA.
|
16 GA.
|
For flow rates above 300 GPM please take a look at these products: